| |
 |
| Step 1: Use 1 leg, 2 shelf tubes, one 4P connector and one
shelf clip. (Two people recommended for this step) |
 |
| Step 2: This step is easiest with two people. One to hold
things together and one to add the 2nd leg and shelf clip and3rd shelf tube.
(Two people recommended for this step) |
 |
| Step 3: Continue to add legs and shelf tubes and corner
clips to complete the first level of your display.
(Two people recommended for this step) |
 |
| Step 4: Once the first level of you display is complete, add
the vertical tubes (usually the longest tubes) |
 |
| Step 5: Build the second level of your display, remember to
use the correct connectors and shelf clips as you go along. |
 |
| Step 6: Once your second level is complete, add the shorter
vertical tubes. |
 |
| Step 7: Add the correct connectors to the vertical tubes. |
 |
| Another view of the connectors used for the corner cube. |
 |
| Shelf connectors can also be used to hold together tubes
that do not cooperate. |
 |
| Step 8: Add horizontal shelves. |
